HomePageBookMark
Service hotline:  +86-13336367528

Industry information

Precautions in handling small tanks

In the process of handling small tanks, safety is of paramount importance. In order to ensure the progress and safety, the operators of each construction team must pay attention to the matters needing attention during the operation. Let me explain to you in detail.
 1. Handling small tanks in place During the whole construction process, the track must remain in an anchor state at all times. When the track anchor beam collides with the hanging basket, it can be removed and installed in rotation;
2. During the walking process of carrying small tanks, safety ropes (less than 20mm steel wire ropes with diameters) must be set for each load-bearing lifting point;
2. In order to ensure safety, it is required to block the steel plates at both ends of the track beam. At the same time, during the operation, a wooden wedge is placed at intervals of 20cm on the track to prevent the sudden drop of the longitudinal slope of the bridge;
3. The nut of the finishing rolled reinforced bar bolted by the main frame of the hanging basket must be tightened, and it is required to check frequently, and it is found that the loosening should be tightened in time;
4. Ensure other safety measures such as platform railings and protective nets. The basket must not move forward before the typhoon comes;
5. Pay attention to the protection of all control points and detection components of the beam body;
6. When handling small tanks, they must be inspected and approved by on-site construction personnel and technicians. They should be unified during the walk and proceed gently to ensure construction safety;
7. After moving the small tank forward, the main frame and the back anchor of the bottom mold must be restored in time (at least two anchors after each component) to effectively eliminate potential safety hazards;