HomePageBookMark
Service hotline:  +86-13336367528

Industry information

CD1 Wire rope electric hoist

The CD1 electric hoist is a light and small lifting device that can be installed on a variety of cranes such as single beam lifting, bridge lifting, gantry cranes, jib cranes, etc. With a slight modification, it can also be used as a winch to meet It is a general use requirement, so it is one of the commonly used lifting equipments in factories, mines, ports, warehouses, goods yards, shops, etc. It is an essential lifting device for improving labor efficiency and improving working conditions.


This product uses a large starting torque cone rotor brake asynchronous motor, no need to apply a brake. The motor load continuation rate is 25%. The motor is made of Class B or Class F insulation. The motor protection class is IP44/IP54. This product adopts a three-stage fixed-axis helical gear transmission structure. The gears and gear shafts are made of heat-treated alloy steel. The cover is made of high-quality cast iron and is tightly assembled and sealed. Use a position that cuts off the main circuit in an emergency and has a top-down stroke protection misfire limiter. The safe operation of the electric hoist is ensured. Electrical components have long life and are more reliable to use. The GB1102-74[6*37+1] type lifting wire rope is used to ensure long-lasting and durable. There are two ways of rope manipulation and cordless remote control.

Scope of application and working conditions:


CD1 (MD1) electric hoist is suitable for working in an environment with temperature -20 ° C -40 ° C, relative humidity ≤ 85%, altitude below 1000 m, no fire, explosion hazard and corrosive medium. It is forbidden to transport molten metal, toxic and flammable. Explosive items. The applicable power supply is AC three-phase, 50Hz, 380v; the working type of this product is intermediate, and the rated lifting capacity must be reduced by 20% for each level of the working level of the working mechanism.